干粉除铁机产品描述:

　　干粉永磁选机(从单筒到四筒)是一种从干性粉料中连续自动除(选)铁的磁选设备其内部采用独特的磁路设计，由高性能永磁王钕铁硼材料作为磁源，磁场强、吸大、除铁率高，具有免维护、节约能源、使用安全可靠等特点，可调整控制进料量，适用于不同颗粒的要求。产品广泛应用于磨料磨具、耐火材料、非金属选矿、碳黑、粮食、饲料、化工原料等行业。

　　干粉永磁选机

　　干粉除铁机主要技术参数：

　　干粉除铁机的安装和维护

　　机器的维护保养是一项极其重要的经常性的工作，它应与极其的操作和检修等密切配合，应有专职人员进行值班检查.

　　一.机器的维护：

　　1、轴承

　　破碎机的轴承担负机器的全部负荷，所以良好的润滑对轴承寿命有很大的关系，它直接影响到机器的使用寿命和运转率，因而要求注入的润滑油必须清洁，密封必须良好，本机器的主要注油处(1)转动轴承(2)轧辊轴承(3)所有齿轮(4)活动轴承、滑动平面.

　　2、新安装的轮箍容易发生松动必须经常进行检查.

　　3、注意机器各部位的工作是否正常.

　　4、注意检查易磨损件的磨损程度，随时注意更换被磨损的零件.

　　5、放活动装置的底架平面，应出去灰尘等物以免机器遇到不能破碎的物料时活动轴承不能在底架上移动，以致发生严重事故.

　　6、轴承油温升高，应立即停车检查原因加以消除.

　　7、转动齿轮在运转时若有冲击声应立即停车检查，并消除。 

Iron powder Product description:

Dry permanent magnetic sorter (from single cylinder to four cylinder) is a dry powder in addition to the continuous automatic (optional) iron magnetic separation equipment inside a unique magnetic circuit design, the high-performance NdFeB permanent magnet Wang material as a magnetic source, the magnetic field is strong, suck big iron rate, with maintenance-free, energy-saving, safe and reliable, adjustable feed rate control suitable for the requirements of different particles. Our products are widely used in abrasives, refractories, non-metallic mineral processing, carbon black, food, feed, chemicals and other industries.

Iron powder machine installation and maintenance

Machine maintenance is an extremely important regular work , it should work closely with the operations and maintenance and other extremely should have full-time staff on duty checks.

I. machine maintenance :

1 , bearing

All load bearing shoulder crusher machine , so good lubrication for the bearing life of a great relationship , it directly affects the life and the operation rate of the machine, thus requiring the injection of oil must be clean , seal must be good , the machine the main oiling Office ( 1 ) Turn the bearing ( 2 ) roller bearing ( 3 ) All gear ( 4 ) activities bearing , sliding plane.

2 , the newly installed tires prone to loosening must always be checked.

3, note that the various parts of the machine is working properly .

4 , pay attention to check the degree of wear of wear parts , pay attention to the replacement of worn parts .

5 , put the activities of the device chassis plane should avoid activities out dust and other materials bearing on the bottom shelf can not move the machine could not have broken the material , resulting in a serious accident.

6 , bearing temperature rise , the reasons should be eliminated immediately stopped and checked .

7 , when the turning gear operation should be immediately stopped if the impact of the sound check and eliminate .

上一篇：【移动式磁选机】
下一篇：【永磁磁力滚筒】